Пластики

Предлагаем к поставке сертифицированный зеркальный пластик, применяемый в интерьере

воздушных судов (JET MIRROR).

Каждая партия поставляется с сертификатом соответствия на конкретную партию продукции.

image-22-04-13-12-03.jpeg

Спецификация LEXAN 9600:

Product Specification:
HMR FR AIRCRAFT GRADE MIRROR / Jet Mirror Sheet
Material Grade: Mar Resistant HMR Optical Quality Polycarbonate Mirror, Flame
Retardant FAA, FAR 25.853 F1 AI 9600 Lexan Sheet
Material color: Clear, Bronze, Gray & Gold #’s 5109, 5184, 713, & 41051
Scope: Optical specifications for HMR, hard mar resistant, aircraft grade, flame
retardant, polycarbonate mirror. Although polycarbonate sheets cannot be
manufactured completely without flaws, the use of this document will insure that
only those sheets meeting this
specification will be used for HMR FR Aircraft Grade Mirror.

PROPERTY REQUIREMENT TEST
1.1 DIMENSION
1.1 Gauge Tolerance
Nominal Gauge Range Min. Limit Max Limit TMB 2000
Available .080” -10% +10%
1.2 Width Tolerance 48” -0” +5” TMB 4000
1.3 Length 96” -0” +2” TMB 5000
2.0 APPEARANCE
Substrate
2.1 Warpage Length divided by 100 TMB 1800
2.2 Squareness .500” (Max.) TMB 2400
2.3 Ripples/Distortion Compared Against Visual TMB 2700 Manufacturer Standard
PROPERTY REQUIREMENT TEST
2.4 Visual Defects TMB 3200
100% Visual
Inspection Performed
A. Black Specks, Carbon
Defect Size Max. Defects Per Sq. Ft. TMB3210
.040” - .065” 1
.032” - .039” 3
.020” - .031” 3
.010” - .019” 10
B. Inclusions, Bubbles, Pits
Defect Size Max. Defects Per Sq. Ft. TMB3600
.040” - .065” 1
.032” - .039” 3
.020” - .031” 4
.010” - .019” 10
3.0 MIRROR
3.1 Visual Defects
Visual Inspection Performed
A. Aluminum Splatter
Defect Size Max. Defects Per Sheet TMB 4815
.065” - .500” 1 Cluster
B. Voids, White Spots
Defect Size Max. Defects Per Sq. Ft. TMB 4820
.040” - .065” 1
.032” - .039” 2
.020” - .031” 4
.010” - .019” 8
C. Protective Backing (Paint)
1. Thickness 1.5 to 2 mils TMB 4960
2. Uniformity Pass TMB 4980
NOTES:

• There shall be no black speck clusters of 3 or more above 0.19” in a 1.0” diameter
circle.
• There shall be no more than 1 splatter cluster on sheet, and limited to 20% of total
sheet area, leaving a minimum of 80% usable sheet.
• There shall be no more than 10% of any production run that yields less than 80%
usable sheet due to aluminum splatters.
4.0 COATING
4.1 Abrasion Taber, Haze 4 % (Max.) TMB 2046
(100 cycles)
4.2 Coating Adhesion
(Scribe) No coating removed by adhesive tape TMB 2047
4.3 Visual Defects
(Coating) 100% Visual
Inspection Performed
A. Lint / Fibers Max. Defects Per Sq. Ft. TMB 1059
Width < .030”
Length > .500” 0
Length < .500” 1
B. Scratches Max. Defects Per Sq. Ft. TMB 1060
(mirror coated side)
Width < .020”
Length > 1.0” 0
Length .500” - 1.0” 1
Length .250” - .500” 4
NOTES:
• Random coating sags or minor areas of distortion may occur around defects. If
such defects do occur, they will generally be less than 1.0” by 1.0” across and shall
not exceed 1 per 25 square feet.
• Inspection of this product must be performed using the test methods indicated. If a
defect does not appear using these methods, it will not be considered a defect.

Наши партнеры
смотреть все
  • ROSSIYA
  • AEROFLOT
  • SARATOV
  • URAL
  • S7
  • IFLY
  • Nordwind
  • Koltsovo Airport
  • S7 Engineering
  • Transaero Airlines
  • Yakutia
  • Sibir Techniks